Wednesday, 25 May 2016

How Cylinder Liner Lubrication Perform Inside Marine Diesel Engine?

Manufacturers producing cylinder liners and sleeves are using two distinct types of lubrication for journal bearings and crosshead bearings employed in marine diesel engines. In this post, engineers will share detailed info about lubrication and will also tell about third interesting type of cylinder liner lubrication.

Piston moves to and fro inside a cylinder and engineers have employed many piston rings inside the grooves on the piston that perform several tasks, including pressure sealing inside the combustion chamber. The speed of rubbing (friction) between the cylinder liner and piston rings is high. Other than this, there are extreme temperature conditions, pressure, and corrosive gases within the combustion chamber to which any lubricating oil between the piston and the liner would be used to.

Marine diesel engine is equipped with several components that are in relative motion that can be different kinds- sliding, rotary, or oscillatory. Lubrication is a critical step to make the performance of the device smoother and prevent wearing of the components and damage.

As there are several rotary parts in every engine including marine diesel engines, it is necessary to take care of the device and its components. Though you cannot eliminate the friction completely, but you can lower the friction level by applying apt lubrication techniques. There are four types of motions occurred in a marine engine and thus lubrication should be done accordingly:
  1. There is rotary motion between specific components like crankshafts, camshaft, etc.
  2. Sliding motion between components like cylinders, piston rings, crosshead guide.
  3. Oscillatory motion between components like rocker arms
  4. Line type of friction between components like chain, meshing gear teeth, sprocket wheels, etc.
In general, lubricating oil used inside the cylinder liner should possess viscosity in the range of 115-150 cst at 50 degrees Celsius. You can add special additives to the oil as it may help in enhancing its viscosity. The supply of oil should be ideal as little amount of oil will cause the tear of surfaces and excess of oil will cause damage to various parts, like valve seats, valves, and the exhaust pipes.

Read More Related This : 
 Running an e-commerce business is not an easy deal as you need to invest a lot more on advertising and marketing of your products. It makes sense when you spend your money on the things that actually work.

Thursday, 4 June 2015

Automobile Parts Businesses In India Growing- What’s The Reason Behind It?

Indian automobile parts market is getting strong each day; annual survey report claims the fact is true. The push in the automotive spare parts business is expected to rise with vehicles demand and sale. As most of the dealers ramp up their inventories of vehicles, they should seek for extra parts to service those automotives. Still some of the small scale businesses look after the ways to enhance their product sales and business growth. In this post, experts will going to share some tricks to grow automotive spare parts business in India.

Sunday, 3 May 2015

How To Buy Spares And Components From Auto Parts Exporters Without Getting Screwed?

Most car owners who seek for servicing centers are often shocked when they find how much it is costly to replace a part. Auto parts exporters are supplying distinct range of spares and auto components; however, fewer parts may cost you more and make holes to your pocket. To avoid coming in contact with such suppliers who offer more expensive automotive parts than others, you need to plan and work according to the strategy.

You can start adopting these steps and discover least expensive or highly affordable exporter to source desired auto parts.

Tuesday, 14 April 2015

How To Replace Valve Seat Inserts In Cylinder Heads?

Valve seat inserts replacement is one of the initial tasks that is often required when rebuilding cast iron or aluminum heads with damaged, cracked, or badly worn seats. If the cylinder head is made from CI material with integral seats, it has to be machined to replace the seat, whereas if the cylinder head is made from aluminum, it has to machine to accept an oversize seat in case of loose, damaged, or deformed bore. In any manner, engineer has to determine the interference amount that is required for the new seat prior cutting the head. Moreover, he needs to decide the seat type for installation.

Thursday, 27 March 2014

Combustion Engines hold its longevity to Piston Pins

All about a piston pin

Regarded as a crucial component for every historic and modern car engine, piston pins provide an unbelievably tough life to combustion engines. It is a link amid the piston as well as the connecting rod. Owing to the fluctuating movement of a piston along with the interface of inertial forces and gas, these are subjected to extreme loads in an alternating direction. 

A piston pin is also known as a wrist pin or gudgeon pin and is basically used for securely fastening a piston with a connecting rod, while permitting ample play to connecting rods for free angular movements in compliance with the needs of the kinematics of an engine assembly. These pins are crucial for a smooth and trouble-free functioning of an engine and thereby ensuring its longer life. Piston pins are generally hollow cylinders developed with special alloy steel possessing hard and highly polished outer surface allowing it to put up with wear and tear owing to the movement of the piston shafts. 

A piston pin is made available in a plethora of types namely diesel engine piston pins, petrol engine piston pin, gas engine piston pin, alloy steel piston pin and automotive piston pin.

Functional Areas 

This mechanical device is a crucial auto part which is perfectly suitable to be utilized in;
·        Petrol, Diesel and Gas Engines
·        Gas and Air Compressors
·        Automobiles
·        LMV and HMV Tractors
·        Heavy Earth Movers
·        Pumps
·        Pneumatic cylinders 

Semi-floating Vs Full floating piston pins 

A piston pin is classified into two forms namely semi-floating and full floating. If the pin is locked to a piston boss or the connecting rod, it is referred as semi-floating. Whereas when the pins are free to spin on the connecting rod bushing and piston bosses, it is referred as full floating. Here the pins are prevented to move outside the pistons and negating the wall of the cylinder with the help of a retaining spring lock. These are particularly manufactured from steel and possess utmost smooth finish for reducing friction. 

Striking attributes of piston pins

To function unfailingly under the stresses and loads, a piston pin offers multiple benefits:
·        High fatigue threshold
·        Strength, rigidity and durability
·        Cost-effective production
·        Superior surface finishes for fine bearing characteristics surrounding the piston assembly
·        Light weight for keeping the inertia force to a minimum
·        Resistance to corrosion
·        Lasting performance
·        Super-finished
·        Easy installation
·        Low maintenance
·        High tensile strength
·        Rust proof 

It is highly imperative to take every engine problem seriously. This makes pistons pins a critical component which renders effective services for optimum performance of the engines.

Sunday, 18 August 2013

Air Cooled Cylinder Liner- The Engine Performance Enhancer

The importance of Air Cooled Cylinder liner can be seen mostly in the automobile industry where the demand comes in bulk. There are numerous companies who deal with the manufacturing of such a product in the global market. The availability of such type of liners varies in assorted sizes and dimensions which can also be tailor made as per the requirements of the customers. The liners are known for having the ability of centrifugally compelling the impurities to the bore surface from where these are removed with the support of different machining processes. 
Air Cooled Cylinder Liner Manufacturing Company Inida

Air Cooled Cylinder Liner

The offered range exhibits excellent efficiency in terms of functionality and performance. The air cooled cylinder liner is precision made to serve the desired requirements which are as per the engine specifications.

Salient features: 
  • Optimum performance
  • Wear and tear resistance
  • Tough construction
  • Corrosion resistant
  • Minimal maintenance
  • High durability
  • Affordable price

 The Auto Parts manufacturing process basically consists of the liners being centrifugally cast. These products are manufactured for various engine requirements in the international market which are in accordance with stringent quality standards. The production is carried out keeping into consideration the need to have strict tolerances for such products which ensures that the liners are optimally fitted within the engine block. The additional quality features of such air cooled cylinder liner are the material used, the structure defined for various engine purposes and the surface quality. To attain a specific dimension as per requirement, the composition of the melt, the machining process and the treatment of the melt are determined in close coordination with the engine manufacturers.The Auto Parts Manufacturing processes are comprehended with the most advanced technological work benches and tools.

By amalgamating different grades of metal with chromium and nickel makes this type of cylinder liner corrosion resistant. Stringent micro structure and material are made to be analyzed to attain the highest quality standards and comply with the international specifications. The sensitive controlled machines are utilized to test the product to avoid any flaw in them. To suit the engine specification, The Auto Parts Manufacturing companies take utmost steps to deliver the air cooled cylinder liner products as per the original specifications, metallurgical as well as dimensionally